GENERAL SPECIFICATIONS

• Category: Wood

• Sub-category: Dark

• Type of product: PVC

• Width: 122 cm

• Length: 20 m

• Adhesive: Acrylic PSA with air release system

• Warranty: 10

• Stretchable: Stretchable

• Resistance to scratch: High

• Pattern direction: Length

• Thickness (average by category): 400 - 450 µm

• Storage condition (maximum 3 years from delivery): 5° C - 30° C

• Installation method: Dry

• Installation area: Interior

• Installation temperature: 12° C - 38° C

• Installation method (ABBA - ABAB): ABAB

CERTIFICATIONS

• CE Wallcovering (EN15102): Compliant

• REACH: Compliant

• Aldehydes after emission (CMR ISO 16000): Not tested

• Volatile Organic Compounds Testing (EN16516): Not tested

• Fire rating (EN13501-1): D-s2,d0

• Wall covering – specification for cork roll (EN13085): Not required

• IMO/MED Modul B - E: Not tested

• RAIL (ISO 5658 - 2:2006 + A1:2011): Not tested

• Stain resistance (Tchibo): Not tested

• Antibacterial properties (JIS Z 2081 am.1 2012): Not tested

• Spongeability (EN12956): Not tested

• Washability (EN12956): Not tested

• Scrubability (EN12956): Not tested

• Color fastness to rubbing (ISO 105-X12) – Assessment according to grey scales: Not tested

• Color fastness to shampooing (ISO 18168): Not tested

• Color fastness to water (ISO 105-E01): Not tested

• Liquid absorbency capacity (ISO 9073-6 2000): Not tested

• Liquid wicking rate (ISO 9073-6 2000): Not tested

• Dimensional stability (ISO 3759) – 24h at 50° C, 65% humidity: Not tested

• Heat and thermal cycle resistance: Not tested

• Color fastness to light: Not tested

• Adhesion Test: Tested

• Moisture resistance: Not tested

CARE AND MAINTENANCE

Durability:

This product offers exceptional resistance to water, dirt, abrasion, UV rays, and wear (yellowing, crackling, scaling, delamination).

Maintenance:

• For daily care, use mild soap or pH-neutral detergent.

• Avoid products with extremely acidic or basic pH levels.

• Use only soft cloths or sponges.

• For stubborn stains: apply hot water (not boiling).

• If necessary: use solution of 70% isopropyl alcohol / 30% water (not on printed film surfaces).

• For sanitizing: use only isopropyl alcohol-based products (not for daily use).

• Avoid organic-based cleaners like ammonia or polish.

• Test cleaning products on a hidden area first.

• Cork Prestige references require minimal cleaning; use soft brush and absorbent cloth if damp.

Persistent stains may require a patch repair method or replacement of the vinyl.