The High Resistant Decor Color 102 in this kitchen features a sleek, high-gloss black finish. Its surface is created using EVOLV high-resistant architectural vinyl wrap, designed to be durable and maintain its polished appearance. The PVC material gives off a deep, reflective shine that enhances the modern, minimalist aesthetic of the space. Its smooth, flawless surface resists scratches and stains, making it both practical and visually striking in this contemporary kitchen setting. The contrast between the dark countertop and the light cabinetry creates an elegant and bold focal point.
GENERAL SPECIFICATIONS
Category: Essential
Sub-category: Essential
Type of product: PVC + PET
Width: 122 cm
Length: 50 m
Adhesive: Acrylic PSA with air release system
Warranty: 10
Stretchable: Not Stretchable
Resistance to scratch: High
Pattern direction: -
Thickness (average by category): 280 μm
Storage condition (maximum 3 years from delivery): 5° C - 30° C
Installation method: Dry
Installation area: Interior
Installation temperature: 12° C - 38° C
Installation method (ABBA - ABAB): ABAB
CERTIFICATIONS
CE Wallcovering (EN15102): Compliant
REACH: Compliant
Aldehydes after emission (CMR ISO 16000): Not tested
Volatile Organic Compounds Testing (EN16516): Not tested
Fire rating (EN13501-1): D-s2,d0
Wall covering - specification for cork roll (EN13085): Not required
IMO/MED Modul B - E: Not tested
RAIL (ISO 5658 - 2:2006 + A1:2011): Not tested
Stain resistance (Tchibo): Not tested
Antibacterial properties JIS Z 2081 am.1 (2012): Not tested
Spongeability (EN12956): Not tested
Washability (EN12956): Not tested
Scrubability (EN12956): Not tested
Color fastness to rubbing (ISO 105-X12): Not tested
Color fastness to shampooing (ISO 18168): Not tested
Color fastness to water (ISO 105-E01): Not tested
Liquid absorbency capacity (ISO 9073-6 2000): Not tested
Liquid wicking rate (ISO 9073-6 2000): Not tested
Dimensional stability (ISO 3759) - 24h at 50° C - 65% humidity: Not tested
Heat and thermal cycle resistance: Not tested
Color fastness to light: Not tested
Adhesion Test: Tested
Moisture resistance: Not tested
CARE AND MAINTENANCE
Durability:
This product offers exceptional resistance to water, dirt, abrasion, UV rays and wear (yellowing, crackling, scaling, delamination).
Maintenance:
For daily care, use a mild soap or pH-neutral detergent to clean the film’s surface. Avoid products with extremely acidic or basic pH levels, as they can harm the material. Use only soft cloths or sponges. For stubborn stains, apply hot water (not boiling). If needed, use a solution of 70% isopropyl alcohol / 30% water (not on printed films). For sanitizing, use isopropyl alcohol-based products (not for daily use). Avoid organic-based cleaners like ammonia or polish. Test all detergents first on a hidden area. For Cork Prestige, minimal care is required—use a soft-bristle brush and dry wet stains immediately. Persistent stains may require patch repair (not guaranteed) or full replacement.
